Odroid H3+
The manufacturer has discontinued this model. For a new installation, check availability or choose another supported model; discontinuation does not change the compatibility test results listed here.
Introduction and orientation
Review this model’s tested compatibility, specifications, limitations and available technical documentation.
Overview and explanation
Verified compatibility
- Applications: No
- FHD video: Yes
- UHD video: No
Description and specifications from the manufacturer
An x86 single-board computer with an Intel N6005 processor, DDR4 memory and two 2.5 Gb/s Ethernet ports.
| Parameter | Value |
|---|---|
| Device type | SBC |
| Processor | Intel Pentium Silver N6005 |
| Architecture | x86-64 |
| Cores / threads | 4 / 4 |
| Maximum CPU frequency | 3.3 GHz |
| Graphics | Intel UHD Graphics; 32 EU |
| RAM type | DDR4-2933 |
| Memory slots | 2× SO-DIMM |
| Maximum RAM capacity | 64 GB |
| Installed RAM / variants | Supplied without installed RAM |
| Storage interfaces | M.2 2280 NVMe PCIe 3.0 ×4; 2× SATA; eMMC |
| Installed storage / variants | Storage is added separately |
| Display outputs | 1× HDMI 2.0 + 1× DisplayPort 1.2 |
| Manufacturer display-output resolution | 4K / 60 Hz |
| Ethernet | 2× RJ45; 2.5 Gb/s |
| Wi-Fi | Not onboard; an adapter can be added |
| Bluetooth | Not onboard; an adapter can be added |
| USB | 2× USB 3.0; 2× USB 2.0 |
| Audio | 3.5 mm; SPDIF; HDMI / DP |
| Other interfaces | 24-pin: UART; I²C; USB 2.0 |
| Power supply | DC 14–20 V |
| Cooling | Heatsink; a fan can be added |
| Dimensions | 110 × 110 × 47 mm |
Installed RAM and storage depend on the purchased configuration. Maximum capacity does not describe the memory supplied.
Check specifications and further technical details in the documentation: Manufacturer data source ↗
Manufacturer specifications describe the hardware. Software compatibility is determined by the test results and limitations on this page.
System configuration and requirements
The system requirement: at least 4 GB RAM for FHD.
Known limitations
- Configure automatic power-on manually in the BIOS using a keyboard.
- Wi-Fi requires a USB adapter.
Required components
- Board
- Fan
- Case
- Power supply
- RAM
- M.2 NVMe 2280 SSD
- Optional USB Wi-Fi adapter
Manufacturer: https://www.hardkernel.com/
Technical documentation
The document covers H3 and H3+. The H3+ information applies to this page.
Related topics and next steps
Contact your software provider.